3M Company 3M Ranger Blood/Fluid Warming High Flow Set Catalog Numbers 24355, 24370 recall: Field action to clarify the flow rates and inlet fluid temperatures
Field action to clarify the flow rates and inlet fluid temperatures, along with location of the outlet temperature for Ranger Blood/Fluid Warming High Flow Sets.
The hazard
Field action to clarify the flow rates and inlet fluid temperatures, along with location of the outlet temperature for Ranger Blood/Fluid Warming High Flow Sets.
Recall details
- Recall number
- Z-2483-2025
- Published
- September 24, 2025
- Risk level
- Class I
- Status
- Ongoing
- Issued by
- U.S. Food and Drug Administration
- Brand
- 3M Company
- Product type
- Medical devices
- Units affected
- 530,470 units
- Distribution
- Nationwide
- Made in
- United States
- Lot / code info
- All lots with a manufacturing date after March 2022.
Products covered by this recall
3M Ranger Blood/Fluid Warming High Flow Set Catalog Numbers 24355, 24370
What this device recall means for you
Most device recalls are corrections rather than removals: the product stays in use and the manufacturer issues updated instructions, a software patch or a replacement part. Check which applies before you change anything.
- Match the model, catalogue and lot numbers above against the label on your device or its packaging.
- If the device is implanted or you depend on it daily, do not remove, disable or stop using it before speaking to your clinician. The notice above explains the specific failure mode they need to know about.
- If you are a clinician or facility, quarantine affected stock, check whether the manufacturer has issued a field correction, and work through your usual recall log.
- Home users should contact the supplier who provided the device — a hospital, DME company or online retailer — as they hold the serial-number records needed to action the recall.
- Problems with a device can be reported to the FDA through MedWatch, which feeds the same enforcement database this page is built from.
Replacements, repairs and reimbursement
Device remedies are handled through the supply chain, so the route depends on who sold you the unit.
- Contact the distributor or clinic named on your paperwork and quote the recall number shown on this page. They will tell you whether the remedy is a repair, a replacement or an instruction update.
- Consumer-purchased devices such as monitors and test kits are normally replaced free of charge by the manufacturer, who pays return shipping.
- If the device was billed to insurance or Medicare, the replacement is usually billed the same way; you should not be charged a second deductible for a recall.
- Keep every piece of correspondence. If a recalled device caused harm, that paper trail is what a claim will rest on.
Company contact: 3M Company — 2510 Conway Ave E, Saint Paul, MN, 55144-0001
The official notice
This page summarises a notice published by U.S. Food and Drug Administration. The agency notice is the authoritative version — read it before you act, and treat it as the final word if anything here looks different.
Open the FDA — Device enforcement record U.S. Food and Drug Administration recalls
Related recalls
-
Highest risk · 10 days ago
3M Company Scotch™ Thermal Laminators recall: Risk of Serious Injury or Death from Fire Hazard
Risk of Serious Injury or Death from Fire Hazard
-
Highest risk · 1+ years ago
3M Company Thermal Laminators recall: Overheating
Overheating
-
Class II · 11 days ago
Stryker Sustainability Solutions Bard EP XT Decapolar Steerable recall: Diagnostic electrophysiology (EP) catheter may have a breached sterile
Diagnostic electrophysiology (EP) catheter may have a breached sterile barrier on the straight seal side of the primary pouch, which if used could…
-
Class II · 11 days ago
Steris Corporation Verify Biological Steam Test Pack Model/ recall: Geobacillus stearothermophilus spore population in affected products may fall
Geobacillus stearothermophilus spore population in affected products may fall below minimum shelf life specification. When used to monitor steam…
-
Class II · 11 days ago
Medtronic MiniMed, Inc. Brand Name: MiniMed Flex Product Name: MiniMed Flex Insulin recall: Some MiniMed Flex insulin pumps were released with missing (i.e
Some MiniMed Flex insulin pumps were released with missing (i.e., devices with no result or abort test results are presumed to have failed) or failed…
-
Class II · 11 days ago
Philips Medical Systems Spectral CT and Spectral CT 7500 RT recall: Software issues may affect the safety and performance of Spectral CT
Software issues may affect the safety and performance of Spectral CT system(s). The issues may result in image artifacts, wrong slice thickness, or…